Agen Supplier Pemasok Distributor Tunggal Nabertherm Indonesia

Agen Supplier Pemasok Distributor Tunggal Nabertherm di Indonesia. Menyediakan peralatan Nabertherm terlengkap dan termurah di Indonesia.

High-Temperature Furnaces with SiC Rod Heating up to 1600 °C
Heating times of 25 - 30 minutes can be achieved, depending on the furnace model and the conditions of use.

These powerful laboratory muffle furnaces are available for temperatures up to 1550 °C or 1600 °C. The durability of the SiC rods in periodic use, in combination with their high heating speed, make these high-temperature furnaces to all-rounders in the laboratory. Heating times of 25 - 30 minutes can be achieved, depending on the furnace model and the conditions of use.

Standard Equipment
Tmax 1550 °C or 1600 °C
Working temperature 1500 °C, increased wear and tear must be expected in case of working at higher temperatures
Dual shell housing made of textured stainless steel sheets with additional fan cooling for low surface temperature
Exclusive use of insulation materials without categorization according to EC Regulation No. 1272/2008 (CLP)
Optional flap door (LHTC) which can be used as work platform or lift door (LHTCT) with hot surface facing away from the operator (High-temperature furnace LHTCT 01/16 only with lift door)
Switching system with solid-state-relays, power tuned to the SiC rods
Easy replacement of heating rods
Adjustable air inlet opening, exhaust air opening in the roof
Controller C550 (10 programs with each 20 segments)
Defined application within the constraints of the operating instructions
NTLog Basic for Nabertherm controller: recording of process data with USB-flash drive

Model
Tmax
Inner dimensions in mm
Volume
Outer dimensions1 in mm
Connected
Electrical
Weight
Heating time

in °C
w
d
h
in l
W
D
H2
load in kW
connection*
in kg
in min3
LHTCT 01/16
1550
110
120
120
1.5
340
300
460
3.5
1-phase
18
30
LHTC(T) 03/16
1600
120
210
120
3.0
415
545
490
10.0
3-phase4
30
30
LHTC(T) 08/16
1600
170
290
170
8.0
490
625
540
15.5
3-phase
40
25
1External dimensions vary when furnace is equipped with additional equipment. Dimensions on request.*Please see page 75 for more information about supply voltage
2Plus maximum 240 mm for models LHTCT when open4Heating only between two phases
3Heating time of the empty and closed furnace up to Tmax −100 K (connected to 230 V 1/N/PE rsp. 400 V 3/N/PE)

Additional Equipment
Over-temperature limiter with adjustable cutout temperature as temperature limiter to protect the oven and load
Protective gas connection to purge with non-flammable protective or reaction gases, not gas tight
Manual or automatic gas supply system
Process control and documentation via VCD software package for monitoring, documentation and control

Furnace Tanur